FIRST TIME INSTALLATION
Initialization
The Service Provider will supply you with a specific "Setup Iden-
tifier" code number. This code contain all information necessary
to start the channel search procedure. Please note that this code
number is specific for the service provider and the area where the
box is located.
Enter the number with the numeric buttons on the remote con-
trol. If you enter a wrong digit use the
Press OK and the channel search procedure will start.
You will be informed what is going on during the search proce-
dure.
When you get this message the channel search procedure is fin-
ished.
Press the OK button.
You can now adjust the time by using the
hour at a time.
You can also adjust the minutes by using the
Now the box is ready to show TV channels from the network.
(If the smartcard is not inserted you will be informed to do so.)
GB 14
to erase it. ,
buttons, 1/2 an
buttons.