Pairing The Wireless Subwoofer With The Main Unit - Haier SBEV40-SLIM User Manual

Pairing the Wireless Subwoofer With the Main Unit

When the soundbar system is manufactured, the pairing is preset. Please pair the
subwoofer with the main unit by following the procedure below if interference
occurs or if pairing is interrupted.
1
Press CONNECT on the back of the subwoofer.
2
P ress and hold CONNECT on the remote control for 2 seconds until
"CONNT" displays on the main unit.
3
C heck the LED status.
The subwoofer LED blink shows the pairing status as follows.
Blinks slowly
Blinks fast
Blinking stops.
The red LED is continuously on.
Tips:
• If the wireless connection fails, check for any strong interference (for example,
interference from other electronic devices) around your location. After
removing the strong interference, repeat the above procedure.
• If there is a strong electromagnetic wave product nearby, interference may
occur. Place the main unit away from the location.
Pairing Button
LED
Subwoofer LED
OPERATION
The main unit is not paired.
The main unit is trying to be
paired.
The main unit is paired completely.
English
15