Installing The Remote Control Battery - Haier SBEV40-SLIM User Manual

Caution!
• D o not hang onto the installed main unit and avoid any impact to the main
unit.
• S ecure the main unit firmly to the wall so that it does not fall off. If the main
unit falls off, it may result in an injury, or in damage to the product.
• W hen the main unit is installed on a wall, ensure that the connecting cables
are well out of reach of children, since pulling them may cause the unit to fall.

Installing the Remote Control Battery

1
T o remove the battery cover, push the protruding edge of the cover as
shown.
2
P lace the battery correctly in the battery holder.
3
P ush the battery cover back into its original position.
Note:
• Use only one CR2025 (3 V) lithium battery.
• Remove the battery if the remote control is not used for a long period of time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic materials.
• Do not attempt to clean the remote control with a volatile solvent.
• If the remote control is seriously contaminated, use a soft cloth moistened with
a neutral diluted cleaning agent to clean the display. Wring any excess water
out of the cloth before cleaning to prevent water from penetrating into the
housing. Wipe with a dry cloth after cleaning.
English
13