Terminal Input/Output Control - Motorola M68CPU32BUG User Manual

1.7 TERMINAL INPUT/OUTPUT CONTROL

When entering a command at the prompt, the following control codes may have a caret, " ^ ",
preceding the character, this indicates that the Control or CTRL key must be held down while
striking the character key).
^X (Cancel line) The cursor is backspaced to the beginning of the line.
^H (backspace) The cursor is moved back one position. The character at the new
<del> (delete/rubout) Performs the same function as ''^H''.
^D (redisplay) The entire command line as entered is redisplayed on the following
When observing output from any CPU32Bug command, the XON and XOFF characters may be
entered to control the output, if the XON/XOFF protocol is enabled (default). These characters
are initialized to ''^S'' and ''^Q'' respectively by CPU32Bug, but may be changed by the user using
the PF command. The initialized (default) mode operations are:
^S (wait) Console output is halted.
^Q (resume) Console output is resumed.
M68CPU32BUG/D REV 1
cursor position is erased.
line.
1-7
GENERAL INFORMATION