Fujitsu ETERNUS DX80 S2 User Manual page 178

Appendix B Audit Log List
Event code
020D0002
020D0003
020D0004
020D0005
020D0006
020D0007
020D0008
020D0009
020D000A
020D000B
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Upper: Message
Lower: Detailed information
Set Communication Environment
Detail information is not displayed.
Configure Automatic Log Transmission
$a
[Send_Log_Error_Occur=
$b
Period_Transmission_Log= Time=
$e
Day= ]
Send Log Manually
$a
[Incident_No= Time_Range=
Stop Restart Remote Support
$a
[Mode= ]
Set Download Controller Firmware
$a
[Destination= Auto_DownLoad=
Download_Schedule= $c Download_Date=
$e
Auto_Update= Bandwidth_Limit=
Remote Download Controller Firmware
Detail information is not displayed.
Site Download Controller Firmware
Detail information is not displayed.
Stop Download Controller Firmware
Detail information is not displayed.
Set Firmware Update from Peer Storage
$a $b
[IP= Port= ]
Set Remote Support
[Delete_Customer_Identity_Info=
Copyright 2013 FUJITSU LIMITED
The communication environment settings are
registered or updated.
The automatic log transmission settings are
changed.
$a
: Send Log based on Events (Enable,
$c $d
Period=
Disable)
$b
: Periodic Log Transmission (Enable,
Disable)
$c
: Time for periodic log transmission
(example: 00:00)
$d : Schedule for periodic log transmission
(Once per Week, Every Day)
$e : Day of the week when the periodic logs are
sent (example: Monday)
The log is sent manually.
$a : Incident Number
$b
]
$b
: Time Range Specified (Enable, Disable)
The remote support is stopped or restarted.
$a
: Mode (Stop, Restart)
The download parameters for the controller
firmware are set.
$b
$a
: Download Destination (REMCS, Peer level
$d
Storage System)
$f $g
Speed= ]
$b
: Automatic Download (Enable, Disable)
$c
: Download Schedule (Same as Connection
Period, Once per Week)
$d
: Download Date (example: Sunday 00:00)
$e : Automatic Controller Firmware Update
(Enable, Disable)
$f
: Bandwidth Limit (Enable, Disable)
$g
: Download speed [Kbit/s] (100 – 999)
The controller firmware is downloaded from the
remote support center.
The controller firmware is downloaded from a dif-
ferent storage system.
Downloading of the controller firmware is
stopped.
The settings for downloading controller firmware
from a different storage system are set.
$a
: IP address of the storage system that
contains the downloaded firmware (example:
192.168.1.1)
$b
: LAN port for connecting to the different
storage system (MNT, RMT)
The remote support parameters are set.
$a
: Deletion of the customer information in
$a
]
the storage system (Yes, No)
178
Description
P3AM-4842-12ENZ0