GE 164D4290P393 Owner's Manual And Installation Instructions page 15

17 SECURE HOOD
Slide the hood back against the wall. Tighten
the mounting screws. Be sure the screw heads
are in the narrow neck of the keyhole slot.
NOTE: DO NOT PUSH ON FAN BLADE. Pushing
on the blade may cause it to interfere with other
hood parts.
18 CONNECT DUCTWORK TO
HOOD
(Ducted installations only)
On 7" round installations, attach the 7" duct
with sheet metal screws through the holes in
the alignment ears.
Attachment ear tabs
Use duct tape to make joints secure and air tight.
Duct tape
Installation Instructions
Mounting
screw (4)
Keyhole (4)
7" round duct
19 INSTALL LIGHT BULB
NOTE: A light bulb is not shipped with the hood.
Obtain one locally. Purchase and install an ordinary
screw-base light bulb, not more than 60 watts.
FOLLOW ELECTRICAL CODE
20
Complete the electrical wiring according to
National Electrical Code and local codes.
NOTE: This hood must be permanently grounded.
Connect house wiring (120 VAC) to hood wiring.
15