GE 82-POE User Manual page 124

Chapter 4: Web-Based Management
Binding
Let a device that has specific IP address and MAC address use the network. We can
set specific IP address, MAC address, VLAN id and port id to bind, and device can
cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In Packet Type/Binding box should select Binding.
OBJECT DESCRIPTION
Group ID 1 - 247 (max. 247 ACL group)
Action Permit / Deny.
VLAN Any / VID.
Packet Type IPv4 / Non-IPv4 / Binding
MAC Address **:**:**:**:**:**
* is represent a digit from 0-9 and A-F,
*** is range from 0 to FF.
IP Address ***.***.***.***
* is represent a digit from 0-9,
*** is range from 0 to 255.
Port Id Source port id, from 1-26.
Current List You create ACL and Binding groups.
120
•
Permit : Permit packet cross switch.
•
Deny: Drop packet.
•
Any: Any Vlan id.
•
VID: 1-4094. A certain vlan id.
•
IPv4: Set Ipv4 packet field.
•
Non-IPv4: Set non-Ipv4 packet field.
•
Binding: Set binding entry.
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
DEFAULT VALUE
Permit
Any
IPv4
00:11:22:33:44:55
0.0.0.0
1