GE 82-POE User Manual page 123

OBJECT DESCRIPTION
Port Set this field if Packet Type is IPv4, else ignore.
0-65535
If UDP port not find in UDP field, you can direct assign
number.
Port Id Source port id, from 1-26, 0 means don't care.
Current List You create ACL and Binding groups.
Non-IPv4 ACL
In Packet Type/Binding box should select Non-IPv4
OBJECT DESCRIPTION
Group ID 1 - 247 (max. 247 ACL group)
Action Permit / Deny.
VLAN Any / VID.
Packet Type IPv4 / Non-IPv4 / Binding
Ether Type Set this field if Packet Type is Non-IPv4, else ignore.)
Any / ARP(0x0806) / IPX(0x8137)
Type Set this field if Packet Type is Non-IPv4, else ignore.)
0-0xFFFF
If ether type not find in Ether Type field, you can direct
assign number.
Current List You create ACL and Binding groups.
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
•
Permit: Permit packet cross switch.
•
Deny: Drop packet.
•
Any: Any VLAN ID.
•
VID: 1-4094. A certain VLAN ID.
•
IPv4: Set Ipv4 packet field.
•
Non-IPv4: Set non-Ipv4 packet field.
•
Binding: Set binding entry.
Chapter 4: Web-Based Management
DEFAULT VALUE
0
DEFAULT VALUE
Permit
Any
IPv4
Any
119