Vertical Phase - Honeywell HD6 Series User Manual

5.6 CAMERA OPTIONS, 23X WIDE DYNAMIC RANGE AND TRUE/DAY NIGHT
CAMERA, CONTINUED

5.6.6 Vertical Phase

1. Select 6 to select the vertical phase edge
for line locking the camera. Selecting 6
toggles between POS (positive), NEG
(negative), or NONE. If you select POS
or NEG, you can set the vertical phase
from 1 to 180.
2. Select 7 to change the vertical phase.
Enter a number from 1 to 180 and press
Enter (F5 on HJZTP controller).
When done setting up the camera and lens, press Esc (F6 on HJZTP controller) to exit
the Camera Options Menu. The screen returns to the Main Setup Menu. Select another
menu option or press Esc (F6 on HJZTP controller) to exit the setup mode.
Rev. 1.02
1 Zoom and Focus
2 Exposure Control
3 NightShot Control
4 White Balance
5 Still PreShot................................... OFF
6 Vert Phase Edge ........................... POS
7 Vert Phase 1-180 ............................ 180
ESC to Exit
1 Zoom and Focus
2 Exposure Control
3 NightShot Control
4 White Balance
5 Still PreShot ...................................OFF
6 Vert Phase Edge ........................... POS
7 Vert Phase 1-180.............................180
ESC to Exit
Vertical Phase.................................... 180
Enter number from 1 to 180 and press
Enter.
54
CAMERA OPTIONS
CAMERA OPTIONS
900.0679
22-June-2006