1 - 12 MC9090-G RFID Integrator Guide Supplement
Changing the Keypad Backlight Settings
To change the keypad backlight settings in order to conserve more battery power:
On devices with Windows Mobile 5.0, tap
1.
Select the
2.
On battery power: Disable keylight if not used for:
list box.
Tap the
3.
Advanced
Tap the
4.
Disable keylight
Tap
.
5.
OK
Turning the Radios Off
WLAN Radio on Windows Mobile 5.0
To turn off the WLAN radio tap the
indicating that the radio is disabled (off).
To turn the radio back on, tap the
indicating that the radio is enabled (on).
The MC909X Integrator Guide, P/N: 72E-72216-xx provides the wireless applications support information
applicable to the MC9090-G RFID mobile computer.
Bluetooth and WAN Radios on Windows Mobile 5.0
NOTE The Flight Mode feature only turns off the WAN and Bluetooth radios. The WLAN radio must be turned off
separately.
To turn off the Bluetooth and WAN radios:
Tap the
Connectivity
Turn On Flight Mode
To turn off the Bluetooth and WAN radios, tap the
icon
Antenna/Signal
The MC909X User Guide, P/N: 72E-72215-xx provides the Bluetooth support information applicable to the
MC9090-G RFID mobile computer.
Start
tab.
check box to completely turn off the display backlight.
Signal Strength
Signal Strength
icon
(on non-WAN devices) or the
.
(on WAN devices) and select
>
>
tab >
Settings
System
check box and select a value from the drop-down
icon and select
Disable Radio
icon and select
Enable Radio
Antenna/Signal
icon
(on non-WAN devices) or the
Connectivity
.
Turn On Flight Mode
icon >
Keylight
Battery Power
. A red X appears across the icon
. The red X disappears from the icon
icon
(on WAN devices) and select
tab.