Inserting The Door Panels - GE Profile 28 Owner's Manual

Inserting the door panels.

Read these instructions completely and carefully.
1
Loosen the Top Trim on the Freezer and Fresh Food Doors.
Using a T-20 Torx driver, loosen the two screws attaching the Top Trim about
1/4 (6 mm).
2
Insert the Top Freezer Panel and Fresh Food Panel.
Lift the Top Trim up 1/4 (6 mm) and carefully push the top freezer panel
in until it slides into the slot behind the door handle. Push the filler panel
(required with some door panels) in behind the decorator panel. Repeat
for fresh food panel.
3
Insert the Bottom Freezer Panel.
Carefully push the panel in until it slides into the slot behind the door handle.
Push the filler panel (required with some door panels) in behind the decorator
panel.
4
Tighten the two screws on the Top Trim to 30 in-lbs torque.
Blue Tape
Liner
Side Trim
28
Top Trim Screws
Cut-out
Top
Freezer
Panel
Bottom
Freezer
Panel
Cut-out
Fresh
Food
Panel
Side Trim