The H/Pc Setup Wizard - Philips VELO500 User Manual

Using y our Using y Using y our our our V V V V V elo 500 for the first time
Using y Using y our
To start your Velo 500 for the first time
1 Slide the latch to the right and open the lid.
2 Press the Power button.
The Power button is just above the keyboard near the left
side of the Velo 500 (see Figure 1).
3 The H/PC Setup Wizard will start automatically. Follow
the instructions on the screen to set up your Velo 500.
4 If necessary, adjust the display contrast by pressing
or +< on the Velo 500 keyboard.
ALT

The H/PC Setup Wizard

The first time you use your Velo 500, the H/PC Setup Wizard will
present a brief introduction to the Windows CE operating system
and lead you through a few simple setup procedures:
Calibrate the touch screen. Calibration establishes the
alignment of the background image with the touch-sensitive
portion of the screen and ensures the accuracy of your
stylus taps.
Set your time zone. Select your home city. Windows CE
stores area codes, airport information, sunrise/sunset times,
and relative distances for hundreds of cities all over the
world.
Set the date and time. Because Windows CE uses the date
and time to remind you of appointments as well as to
synchronize files and PIM data with your desktop computer,
it's important to set the date and time correctly.
Enter optional owner information, such as name, address
and phone number. The information you type will be
displayed whenever you turn on your Velo 500 and may
help someone return your Velo 500 to you if it's lost.
To begin Setup
1 Install the main and backup batteries according to the
instructions earlier in this chapter.
2 Turn on your Velo 500.
3 Follow the H/PC Setup Wizard instructions on your screen.
elo 500 for the first time elo 500 for the first time elo 500 for the first time
elo 500 for the first time
+>
ALT
15