GE 164D2966P122 Use And Care Manual page 7

OVENCONTROL, C LOCKANDTIMER
:lock
ToSet the Clock
The clockmustbe set for the automaticoventiming
c1
1. Press the CLOCKpad.
functionsto workproperly,The timeof day cannotbe
changedduringa TimedBakeor Self-Cleancycle.
CLOCK
!
A
A
2. Press the INCREASEor DECREASE
pad to set the time of day.
@
Timer
ToSet the Timer
The timer is a minutetimer;
c1
1. Press the TIMER
it does not controloven operations.
;~vlAE~ ON/OPFpad.
The maximumsettingon the timer
is 9 hoursand 55 minutes.
A
A
2. Press the INCREASE
@
or DECREASEpad
to set the amountof
timeon the timer.
v
@
The timerwill startautomatically
withina fewsecondsof releasing the
INCREASE orDECREASE pad,The
timer, a syoum setting i~willdisplay
secondsuntiloneminuteis reached.
Then it will displayminutesand
secondsuntil60 minutesis reached.
After60minutes, i t willdisplay hours
("HR' now appearsin display)and
minutesuntilthe maximumtime of
9 hoursand 55 minutesis reached.
'1'o R eset the Timer
ToCancelthe Timer
If "TIMER" is displayed, pressthe INCREASEor
Press and hold the TIMERON/OFFpad untilthe
DECREASEpad untildesiredtime is reached.
word "TIMER'disappearsfrom the display.
If "TIMER" is not displayed,pressthe TIMER
ON/OFFpad first,thenfollowthe instructions above
to set thetimer.
End of CycleTone
DisplayMessages
The end of cycletoneis a seriesof threebeeps
If "door" appears in the display,LOCKflashes
followedby one beepevery six seconds.If you would
and the ovencontrolsignals,you set the self-clean
like to removethe signalthat beepsevery six seconds,
cycleand did not shutthe door.
press and hold the CLEAWOFFpad for 10seconds.
If "door" ordy appears in the display,the oven
Toreturnthe signalthatbeepsevery six seconds,
dooris open and needsto be closed.
press and holdthe CLEAWOFFpad for 10 seconds.
. If '6LOCK9' only appearsin the display,the
oven door is in the lockedposition.BAKE,
BROILand COOKTIMEcannotbe setif the
dooris in thelockedposition.
Power Outage
Aftera poweroutage,whenpoweris restored,the
The displayflashesuntilthe clockis reset, All other
displaywill flash and time shownwill no longerbe
functionsthat were in operationwhenthe powerwent
correct-for example,after a 5-minutepower
out will haveto be programmedagain.
interruptionthe clockwill be 5 minutesslow,
7