The Hosts Screen Detail Pane - HP 3PAR StoreServ 7200 2-node Manual

Group
Fibre Channel
Settings
(displayed for
FC and RCFC
ports)
iSNS Settings
(displayed for
iSCSI ports -
not shown)
Clicking the highlighted value for Connected Device in the General area displays the Host Summary
screen or the System screen, depending on the connected device type.

The Hosts Screen Detail Pane

The detail pane of the Hosts screen displays the following:
Column
Host ID
Host Name
Domain
WWN
Port
Clicking the highlighted value under Host Name displays the Host Summary screen or the System
screen, depending on the connected device type.
Field Description
Configured Rate For RCIP ports. The configured data transfer rate. A value of 0 indicates that no
data is being transferred.
Rate For iSCSI ports. Data transfer rate. A value of 0 indicates that no data is being
transferred.
TCP Port The TCP port number used by the iSCSI card.
Duplex (For RCIP) The duplex speed, Half or Full.
Adapter Type For RCIP ports. Model of the adapter that contains the port (for example, Intel
PRO/1000MT).
Topology Type of connection (for example, Fabric Attached).
Class Identifies which Fibre Channel classes of service are enabled (2, 3, or 2/3). 2/3
indicates that both Class 2 and Class 3 are enabled.
Adaptor Type Model of the Fibre Channel adapter that contains the port (for example, QLOGIC
2302).
Remote Node The node WWN. Displayed if the port is an RCFC port.
WWN
Remote Port WWN The port WWN. Displayed if the port is an RCFC port.
Mode Change Indicates whether port mode change from initiator to target or vice versa is Allowed
or Prohibited. This setting is configured using the CLI controlport command.
Hosts The number of hosts connected to the port. This is only displayed if the port is
connected to hosts.
Physical Disks The number of physical disks connected to the port. This is only displayed if the
port is connected to drive cages.
Link State The current state of the link. Displayed if the port is an RCFC port.
Primary IP Address Primary Internet Storage Name Service server IP address. iSNS protocol allows
for automated discovery, management, and configuration of iSCSI.
TCP Port The port on the iSNS server with which to communicate.
Description
The ID of the host associated with the selected port.
The name of the host system.
The domain the host is associated with (if any).
The WWN of the port.
The port location in Node:Slot:Port format.
Viewing Port Information 33