Use The Digital Telephone Desktop; Activation And Power-Save Mode; Record; User Manual - Philips LFH 9850 User Manual

4 Use the Digital Telephone
Desktop
4.1

Activation and power-save mode

The Telephone Desktop is operated with a
power supply (Philips LFH 155); the Telephone
Desktop is switched on and off by connecting or
disconnectingit from the power supply.
If the unit remains inactive for longer than 15
minutes, it automatically switches to the power
save mode and the display is switched off.
Reactivate the unit by pressing any button.
4.2

Record

The memory card by-packed with the
1
Telephone Desktop must be inserted into
the memory card slot.
Connect the telephone cable supplied to
2
the back of the Telephone Desktop and the
telephone socket. The Telephone Desktop
must be the only device connected to the
telephone socket.
Make a phone call to the telephone
3
number to which the Telephone Desktop
is connected. The Telephone Desktop
gives authors feedback and guidance during
telephone recording (voice prompts). You
will be promted to start speaking.
Use the telephone keypad to control the
4
recording functions:

User manual


Pause

Fast
forward

Play
Hang up
Press *
followed
& assign new
by #
work type code
• ress P to pause recording; press
1
start recording again.
• Press to lock the file and mark it as
8
finished (EOL/end-of-letter). The
symbol is displayed and the Telephone
Desktop automatically creates a new,
empty file.
• Press to assign priority status to the
6
recording. The
!
indicating that the file has priority status.
This can be done at any time.
• ress P followed by
*
Telephone Desktop from the telephone.
This can be done at any time.
D Note
• The commands Fast Rewind (3), Fast Forward
(4), Play (7) are available to advanced users
only. See Advanced configuration
more information.
• The language of the voice guidance feature
can be changed using the menu. See
settings on page 9 for more information.
 Fast

Record
rewind
Auto-
!
back- Priority
space


Finish &
Pause
new file
Finish &
 #
new file
Enter
to
2

symbol is displayed,
to disconnect the
#
on page 11 for
Menu
7