Use Bluetooth Devices; Connect A Device; Make A Call - Philips PNS400 User Manual

5 Use Bluetooth
devices
With this navigator, you can also make a call
through Bluetooth. Tap
menu. (For PNS410BT and PNS510BT only)

Connect a device

Note
•
Philips does not guarantee the compatibility with all
Bluetooth devices.
•
Before pairing a device with this system, read its user
manual for Bluetooth compatibility.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
At one time, you can connect only one Bluetooth
device to this system.
•
The operational range between this system and a
Bluetooth device is approximately 3 meters (9 feet).
•
Any obstacle between this system and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
Connect a device
1
Enable the bluetooth function on your
mobile phone.
2
Tap [Open] to active the Bluetooth
function and tap [Pair/Connect].
3
Tap [Search] and then tap [Re-search] to
search the Bluetooth devices that can be
paired.
You can tap [Stop] to stop searching.
•
4
In the device list, tap your device name and
tap connect to start paring.
5
On your device, accept the paring request
and enter the default password '1234'.
to enter Bluetooth
» After connection successfully, tap
the following screen appears.
Tip
•
To change the default password, tap [Modify the PIN].
•
To change the default device name, tap [Modify the
name].
Disconnect a device
Tap [Disconnect] to disconnect the device.

Make a call

Note
•
Keep the Bluetooth connection active between the
system and your mobile phone.
Call a number
1
Tap [Dialing].
,
EN 17