2-4 Making system settings for the controller (server)
2
12
2-4-3 Setting the subnet mask
The following explains how to set the subnet mask.
The subnet mask is a numerical address used to subdivide the network into smaller parts.
1) Press
(PARAM) in "SYSTEM" mode to enter "SYSTEM>PARAM" mode.
F1
2) Press
(OP. BRD).
F5
3) Select the number for "E_Net" with the
keys and press
F1
4) Press the
key twice to select "3. subnet
mask" and then press
F1
5) The currently set subnet mask appears.
To change it, enter the new subnet mask with
9
the
0
to
keys. Enter the exact
number including periods (.).
After changing the setting, press
6) To end the setting, press
select the parameter.
(SELECT).
(EDIT).
.
. To continue setting another parameter, use the
ESC
keys to