Setting The Ip Address - Yamaha RCX series User Manual

2-4 Making system settings for the controller (server)
2
10

2-4-2 Setting the IP address

The following explains how to set the IP address.
The IP address is a number unique to each device and identifies that device from among many other
devices connected on the network. The IP address of one device must not be the same number as
another device so use caution when setting the IP address.
1) Press (PARAM) in "SYSTEM" mode to enter "SYSTEM>PARAM" mode.
F1
2) Press (OP. BRD).
F5
3) Select the number for "E_Net" with the
keys and press
F1
4) Press the key once to select "2. IP address"
and press (EDIT).
F1
5) The currently set IP address appears.
To change it, enter the new IP address with the
9
0 to keys. Enter the exact number
including periods (.).
After changing the setting, press
6) To end the setting, press
select the parameter.
c
CAUTION
All changes to the IP address, subnet mask and gateway settings will be enabled after restarting the robot
controller. When connecting the robot controller on an already existing network, always check with the network
supervisor before making IP address, subnet mask and gateway settings.
(SELECT).
.
. To continue setting another parameter, use the
ESC
keys to