Lenovo 10B0 Maintenance Manual page 215

3. Remove the screw that secures the I/O box on the VESA mount bracket and then slide the I/O box as
shown to remove it from the VESA mount bracket.
Figure 168. Removing the I/O box
To install the I/O box, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
.
Chapter 11 Replacing FRUs (machine types: 10AX and 10AY)
209