Lasers; Positions - GE Everest Ca-Zoom 6.2 Operating Manual

12.3

LASERS

Turns the Parallel Laser accessory mounted on the camera head ON and OFF. The Parallel laser
accessory provides a reference measurement on a perpendicular surface.
Warning
• Prevent direct eye exposure to beam
• Ensure that the beam is always terminated at a suitable non-specular (i.e. non mirror-like)
surface
• Do not direct the beam at other people or into areas where other people may be present
Access
• Press the MENU button
• Highlight LASERS
• Use pointer to select BOTH, RIGHT, LEFT or OFF.
• Press ENTER
Operation
• The Laser accessory mounted on the camera head will turn ON (Both, only Right or Left)
or OFF. Refer to page 67 for Measurement Operation.
2.4

POSITIONS

Allows presetting of HOME, ZERO and ten other unique positions and magnification levels.
Alllow convenient renaming and access to previously preset positions.
Home Position
Menu Feature
Allows user to save a position that is used often and be commanded to return to that position.
Set Home (position)
• Use joystick to position camera to desired home position.
• Move pointer arrow to HOME POSITION
• Move pointer arrow to SET HOME
• Press ENTER.
Zero Position
Menu Feature
• Allows user to set any position to read zero degrees on the pan and tilt position display.
Go to Zero (position)
• Move pointer arrow to ZERO POSITION
• Move pointer arrow to GO TO ZERO
• Press ENTER.
Operation
• Camera will move to ZERO Position previously configured
Set Zero (position)
• Use joystick to position camera to desired zero position.
®
Everest Ca-Zoom 6.2
43