System Setup; Attaching Hh Controller Cable - GE Everest Ca-Zoom 6.2 Operating Manual

8 System Setup

Before setting up the system for use make sure the CCU, Camera Head and Hand-held Controller
are placed on a sturdy surface.
8.1 Attaching Hand-held Controller Cable
Step 1. Remove the Hand-held Controller and Hand-held Controller's cable from the
system's case.
Step 2. Attach the Hand-held Controller cable to the Hand-held Controller by aligning
the red dot on the cable to the small keyway on the Hand-held Controller and
push in. The ferrite bead on the cable is to be oriented toward the Hand-held
Controller.
Step 3. Attach the other end of the Hand-held Controller cable to camera control by align-
ing the red dot on the cable to the small keyway on the CCU.
Hand-held Controller Cable Connection
®
Everest Ca-Zoom 6.2
3