Troubleshooting; Device Homepage - Cisco 7925G Deployment Manual

As of the 1.4(4) release, timezone support has been added; therefore the Java Timezone API is now supported.
As of the 1.4(5) release, a Java MIDlet can now be automatically launched then minimized to the background after the Cisco
Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G is powered on by utilizing the Idle URL feature.
Prior to the 1.4(5) release, a Java MIDlet had to be manually launched.
To have a Java MIDlet auto-launch, the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G must be subscribed to
the Java MIDlet application that is to be specified in the Idle URL configuration. If the Java MIDlet is not subscribed to, then
the auto-launch will fail.
Once the Java MIDlet is subscribed to, configure the Idle URL to point to the Java MIDlet application then add –minimize to
the end of the URL (e.g. http://10.0.0.130/MIDlets/WifiScanner.jad -minimize)
The Java MIDlet will then automatically launch then minimize to the background once the Cisco Unified Wireless IP Phone
7925G, 7925G-EX, or 7926G registers to CUCM after being powered on.
If the Java MIDlet is closed manually after the Java MIDlet is automatically launched then minimized, then the Java MIDlet
must be manually re-launched or the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G must be power cycled.
The Idle URL Timer parameter is not utilized for this feature as the Java MIDlet is only auto-launched immediately once the
CUCM registration event occurs after powering the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G on.
Note: There is a space between the end of the URL and –minimize, but there is not a space between – and minimize.

Troubleshooting

Device Homepage

The Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G webpage provides wireless, network, and Unified CM
information.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
130