Cisco 7925G Deployment Manual page 126

The Load Server can be specified as an alternate TFTP server to retrieve firmware files in the Cisco Unified Wireless IP Phone
7925G, 7925G-EX, and 7926G product specific configuration in Cisco Unified Communications Manager Administration.
To install the firmware on Cisco Unified Communications Manager Express, extract the contents of the TAR file and upload
into the router's flash. Each file will need to be enabled for TFTP download. Configure the phone load and reset the phones to
upgrade the firmware.
7925G & 7925G-EX Example:
tftp-server flash: CP7925G-1.4.5.3.LOADS
tftp-server flash:APPSH-1.4.5.3.SBN
tftp-server flash:GUIH-1.4.5.3.SBN
tftp-server flash:JSYSH-1.4.5.3.SBN
tftp-server flash:JUIH-1.4.5.3.SBN
tftp-server flash:SYSH-1.4.4.1.SBN
tftp-server flash:TNUXH-1.4.5.3.SBN
tftp-server flash:TNUXRH-1.4.5.3.SBN
tftp-server flash:WLANH-1.4.5.3.SBN
!
telephony-service
load 7925 CP7925G-1.4.5.3.LOADS
7926G Example:
tftp-server flash: CP7926G-1.4.5.3.LOADS
tftp-server flash:APPSS-1.4.5.3.SBN
tftp-server flash:GUIS-1.4.5.3.SBN
tftp-server flash:JSYSS-1.4.5.3.SBN
tftp-server flash:JUIS-1.4.5.3.SBN
tftp-server flash:SYSS-1.4.5.3.SBN
tftp-server flash:TNUXS-1.4.5.3.SBN
tftp-server flash:TNUXRS-1.4.5.3.SBN
tftp-server flash:WLANS-1.4.5.3.SBN
tftp-server flash: EA15FW-BF3-220.SBN
!
telephony-service
load 7925 CP7926G-1.4.5.3.LOADS
Web Interface
The phone firmware can be upgraded via the web interface by navigating to Phone Upgrade and browsing to the firmware TAR
file.
In order to access the Phone Upgrade menu, the web access must be set to Full.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
126