Bosch DCN multimedia Hardware Installation Manual page 24

24 en | Mechanical installation of Contribution Devices
How to connect
The system can be quickly and easily configured as a daisy‑chain configuration (see Typical
system setup, page 7), or as a star configuration:
–
–
Notice!
When Power over Ethernet is used, devices cannot be daisy‑chained.
The star configuration makes use of connectors underneath the devices, ensuring for a neat,
tidy system installation, especially advantageous for TV coverage.
To connect the system network cables to the device (Refer to figure "DCNM-MMD Bottom
view (fixed installation)" following.):
1.
2.
How to install
The multimedia device can be free-standing or fixed in more permanent installations using
mounting screws.
For fixed installation:
1.
2.
2
Figure 7.2: DCNM-MMD Bottom view (fixed installation)
Item
1
2
3
4
2013-08 | V1.0 |
Daisy‑chain configuration: Uses dedicated cabling, consisting of CAT‑5e cables including
two additional power conductors.
Star configuration: Each device is connected with an individual standard CAT‑5e cable.
An Ethernet switch is also required for providing Power over Ethernet (PoE).
Insert the system network cable/connector (2).
Lead the system network cable through the cable guides (3).
The distance between the centres of the screw inserts (1) on the bottom of the
DCNM‑MMD is 100 mm.
Use M4 type of screws with a device screw insert length of maximum 5 mm when
attaching the device to the bottom of the recess (1).
1
3 4
Description
Screw insert for fixed installation.
2x RJ45 connection input/output for system power cable.
Cable guides.
USB connector (for future use)
Hardware Installation Manual
1
DCN multimedia
Bosch Security Systems B.V.