Bosch VMS Operator's Manual page 73

Bosch Video Management System
10
11
12
13
14
15
Detailed information:
–
–
–
–
Bosch Sicherheitssysteme GmbH
8 Alarm priority
9 Time
Alarm Sequence buttons
Number of alarms
Alarm List window
Event type
Monitors window (only
available if at least one analog
monitor group has been
configured)
PTZ Control window
Logical Tree window
Favorites Tree window
Bookmarks window
Map window
Menu commands, page 74
Logical Tree window, page 80
Favorites Tree window, page 81
Map window, page 85
Displays the priority value that was configured in
the Configuration Client for the automatic display
behavior.
Displays the time when the alarm was triggered.
Click to display the previous or next Alarm Image
pane.
Displays the number of the currently displayed
alarm and the number of all alarms.
Displays all alarms the system generates.
Allows you to accept or clear an alarm or to start a
workflow, for example, by sending an E-mail to a
maintenance person.
The Alarm List is not being displayed, when the
connection to the Management Server is lost.
Indicates the type of event that triggered the alarm.
Displays the configured analog monitor groups.
Allows you to switch to the next or previous analog
monitor group if available.
Note:
The Monitors tab is not visible if your
Operator Client is connected to more than one
Management Server.
Allows you to control a PTZ camera.
Displays the devices your user group has access to.
Allows you to select a device for assigning it to an
Image pane.
Allows you to organize the devices of the Logical
Tree as required.
Allows you to manage bookmarks.
Displays a site map. Allows you to drag the map to
display a particular section of the map.
If activated, a map is displayed automatically for
each camera displayed in an Image pane. In this
case, the camera must be configured on a map.
Operator's Manual
User interface | en 73
2013.07 | V1 | Operator Client