Using A Cctv Keyboard; Using Kbd Universal Xf Keyboard; Kbd Universal Xf Keyboard User Interface - Bosch VMS Operator's Manual

54 en | Using a CCTV keyboard
11

Using a CCTV keyboard

This chapter describes how to use Bosch VMS Operator Client with a Bosch IntuiKey keyboard
or a KBD Universal XF keyboard.
11.1

Using KBD Universal XF keyboard

You can use the VideoTec DCZ keyboard as a USB keyboard for Bosch VMS.
See http://www.videotec.com/en/page_617.html for details.
Attach the keyboard template for Bosch VMS to the keyboard before use.
You can configure the keyboard for use by a left-handed operator. Refer to the Instructions
Manual delivered with the KBD Universal XF keyboard.
11.1.1

KBD Universal XF keyboard user interface

The following table lists the icons on the keyboard template and their respective function.
Icon
ESC
2013.07 | V1 | Operator Client
Function
Trigger a user event, only available with single Management Server
Audio on / off
Blinking indicates that the function is enabled.
Start /stop alarm recording
Toggle between Live Mode and Playback Mode
Blinking indicates that the function is enabled.
Toggle selected Image pane between Live Mode and instant playback.
Blinking indicates that the function is enabled.
Load a sequence. Enter a valid sequence number and confirm with OK.
Use the playback buttons for controlling the sequence.
Blinking indicates that the input of a number is required.
Reduce number of Image panes
Increase number of Image panes
Full-screen on / off
Maximize / restore selected Image pane
Breaks the entering of a number.
Press twice to close selected Image pane.
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH