Guide - GE 15-Feb User Manual

T
ROUBLESHOOTING
Problem
No dial tone.
Won't dial out
Phone doesn't ring
Low handset or
speaker volume
Light and tone
feedback flutter when
dialing in PULSE mode.
Can't be heard by
other party
Memory dialing
12
G
UIDE
Solution
• Check hook switch to make
sure it pops up.
• Make sure speakerphone indicator comes
on (if using speakerphone.)
• Make sure TONE/PULSE is set to correct
position.
• Unplug the phone, wait 30 seconds, and
plug the phone back in.
• Check RINGER VOLUME.
• Could have too many phones on one
line. (The total LN of all phones should
not be greater than the maximum LN
for your calling area, Usually 5.)
• Check the volume settings (see p. 8).
• This is normal as power is fluctuating
with phone outpulsing.
• Make sure phone cord is securely
plugged in.
• Make sure MUTE indicator is off.
• Make sure you entered numbers
correctly. (See "Memory Dialing.")