16
en | Connection and mounting
4.4
Lens mounting
The camera accepts CS-mount lenses. C-mount lenses can be
mounted using the lens adapter ring. DC-iris lenses are
recommended for the best picture performance.
CAUTION!
To avoid damaging the CCD sensor when using a C-mount lens,
make sure the supplied lens adapter ring is mounted onto the
camera before mounting the lens.
Lenses weighing more than 0.5 kg (1.1lbs) must be separately
supported.
Figure 4.5 Mounting a lens
Pin
1
2
3
4
Note
If a short circuit is detected on the lens connector, the on-
screen display (OSD) failure message LENS SHORT CIRCUIT is
shown. The lens circuit is automatically disabled to avoid
internal damage. Remove the lens connector and check the pin
connections.
AM18-Q0644 | v1.0 | 2013.03
Bosch
DC iris lens
Damp -
Damp +
Drive +
Drive -
Installation Manual
DINION 5000 AN
Bosch
Figure 4.6 Lens connector
Bosch Security Systems