Lock Or Unlock Control Of A Monitor; Recording A Camera Pre-Position Scene; Recalling A Camera Pre-Position Scene; Activate/Deactivate Auxiliary Function - Bosch LTC 8500 Instruction Manual

Lock or Unlock Control of a Monitor

Recording a Camera Pre-position Scene

NOTE

Recalling a Camera Pre-position Scene

Activate/Deactivate Auxiliary Function

EN | 46
• When using IntuiKey keyboards, press [Device Lockout], located on the main
Allegiant menu screen for these options.
• With LTC 8555 Series keyboards, press [Monitor], [Lock], then [ON] to lock a
monitor or [OFF] to unlock the monitor. If the monitor to be unlocked is not the
one currently being controlled by the keyboard, enter the monitor number (but
do not press [Enter]) after you press [Monitor].
If the Status option is enabled, the section of the on-screen overlay between the
camera number and the time shows
prevents other operators from changing the video on the monitor being used (unless
they have a higher priority). Remember to unlock the monitor when finished so
other operators can access it. If an operator with a higher priority accesses a locked
monitor and switches to a different camera, the lock is automatically removed.
Select a camera with pan/tilt/zoom control and with preposition options. Using the
joystick and lens controls, adjust the camera to view the scene you wish to store.
When using IntuiKey keyboards, press [Camera Control], located on the main Alle-
giant menu screen to enter a menu screen with this option. Press Set Shot [Set],
then select the scene number via the numeric keypad, and press [Enter]. The camera
position is stored for recall later.
If an AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
If an Allegiant conventional receiver/driver is being controlled, the pan/tilt and
zoom lens must have the necessary options for pre-position operation. On certain
models of AutoDomes and Allegiant Receiver/Driver Series, it is possible to disable
a previously stored pre-position, or remove it from a pre-position tour, by pressing
Set Shot [Set], the digit 9, followed by the 2-digit pre-position number. Refer to
information supplied with the device to determine if it supports this feature.
Alarm activations are defaulted to call preposition scene 16.
Select the camera to be activated. Press Shot, enter a previously stored camera posi-
tion number via the numeric keypad, then press [Enter]. The camera automatically
returns to the previously stored position. If a second pre-position is called prior to
the completion of the first, the camera will move directly to the second shot.
If the AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
When using IntuiKey keyboards, press [Camera Control], on the main Allegiant
menu screen to enter a menu containing these options. To turn on an auxiliary func-
tion of a remote camera device, press Aux ON [ON], enter the number of the auxil-
iary you would like to activate and then press [Enter]. Holding the [Enter] key down
causes the auxiliary function to be sent repeatedly. This capability is useful when the
auxiliary is activating a housing window washer function, or a temporary light
source.
M
indicating the monitor is locked. This status
L
Bosch Security Systems | December 13, 2005