NEC Express5800 320La System Configuration Manual page 91

5. Enter the directory in which the updated firmware image is located (Step 1).
After you have entered the absolute path of the firmware image, click on the
Execute button to update the firmware. The "Firmware update completed"
screen displays when the update has completed.
At this point in the firmware update procedure, each CPU
module may be at different revision levels. Perform Step 6
immediately after confirmation that the firmware update has
completed in Step 5.
6. At the FT Server Utility screen, select CPU module 2. Click on the
Firmware Update button. The Firmware Update screen displays.
7. Enter the directory in which the updated firmware image is located (Step 1).
After you have entered the absolute path of the firmware image, click on
Execute to update the firmware. The "Firmware update completed" screen
displays when the update has completed.
8. Bring up CPU module 2. The firmware in both CPU modules has been
updated and both CPU modules are up.
Execute Button
Pressing the Execute button dumps the current memory contents to a log file.
Information in this log file may be used during troubleshooting procedures. A
memory dump can be made with the CPU module up or down. However, if a
memory dump is made when the CPU module up, The CPU module is taken
offline until the memory dump has completed.
Note:
CPU module 1 will be performed.
CAUTION
In the following procedure a memory dump of
Monitoring the ft Server 4-31