Table of Contents
Advertisement
• Set up call rejection messages: allows you to manage both
existing rejection messages and create new ones.
• Answering/ending calls: allows you to manage the settings
for answering and ending calls.
–
The home key answers calls allows you to press
answer the phone.
–
Voice control allows you to answer incoming voice calls using
voice.
–
The power key ends calls allows you to press the power key
to end the current call.
• Turn off screen during calls: allows you to force the screen to
turn off during an active call.
• Call alerts: allows you to assign call alert tones and activate
call alerts and vibration.
–
Call vibrations: vibrates the phone when the called party
answers. Choose from: Vibrate on connection to network or
Call-end vibration.
–
Call status tones: assigns sounds settings during the call.
Choose from: Call connect tone, Minute minder, and Call end
tone.
274
–
Alerts on call: selects whether alarm and message notification
is turned off during a call.
• Call accessories: allows you to assign headset settings during
incoming calls.
–
to
Automatic answering configures the device to automatically
answer and incoming call when a headset is detected.
–
Automatic answering timer configures the time delay before
the device automatically accepts the incoming call.
–
Outgoing call conditions configures the connected Bluetooth
device to make outbound calls within one of two settings: Even
when device locked or Only when device unlocked.
• Ringtones and keypad tones: allows you to manage your
device's ringtones and vibratory features. Choose from:
Ringtones, Vibrations, Vibrate when ringing, and Keypad tones
(used when the keypad is pressed).
• Personalize call sound: allows you to enable the personalize
call sound function within an active call. You can adjust the
audio by enabling selecting an audio preset. For more
information, refer to "Adjusting the Call Volume" on page
70.
Advertisement
Table of Contents
