Table of Contents
Advertisement
Note: The Wi-Fi Hotspot drains your device's battery at a much
faster rate than when using any other feature
combination. The best way to keep using the device as a
Hotspot is to have it connected to a power supply.
To connect to the Wi-Fi Hotspot:
1. Enable Wi-Fi (wireless) functionality on your target
device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the external device and
select your device's Portable Wi-Fi HotSpot name from
the network list.
• The SSID name for your device's hotspot is determined by what
you entered into the Network SSID field.
• You can change the name by tapping Configure
SSID and changing the entry.
3. Select this HotSpot and follow your on-screen
instructions to complete the connection.
4. Launch your Web browser to confirm you have an
Internet connection.
To change the Wi-Fi Hotspot password:
1. From the main Settings page, tap Connections tab
More networks
Portable Wi-Fi hotspot field and then select Configure.
2. Tap the Security field and select WPA2 PSK.
3. With security enabled, delete the previous password
and enter a new one into the Password field.
Important! The more complex the password, the harder it will
4. Tap Save to store the new settings.
Network
Tethering and portable hotspot
be for intruders to break your security. It is
recommended that you not use names, birthdays,
or other personal information.
Connections
245
Advertisement
Table of Contents
