Sony DWZ-B30GB Operating Instructions Manual page 31

RF mode Transmitting
channel
number
Wide band 1/2/3/4/5/6
(WIDE)
Narrow a/b/c/d/e/f
band
(NARROW)
Caution
When using multiple channels (up to six),
the two RF modes, wide band and narrow
band, cannot be used simultaneously. Select
only one RF mode during use.
1
Set the RF MODE (RF mode
selection) switch to WIDE or
NARROW.
2
Turn the CHANNEL (channel
selection) switch to set the receiving
channel.
Caution
If you change the channel setting, be sure to
change the channel setting on the
transmitter to the same channel. If the
receiver channel and transmitter channel
are not identical, audio will not be output.
Configuring the cable tone
Description
generator
The cable tone generator is a function that
This mode
modifies sound properties to simulate the
reduces any
quality of a wired cable connection.
interference
You can simulate the sound quality of a
to other
cable that is 1 m to 25 m in length by setting
wireless
the CABLE TONE switch to the
equipment.
corresponding number (m).
This mode
Supposed cable length (m): OFF/1/3/5/8/
reduces any
12/18/25
interference
from other
wireless
equipment.
Receiver Settings 31