Sony DWZ-B30GB Operating Instructions Manual page 21

Caution
Do not set the switch to the INST position
while outputting audio to an audio mixer or
similar device. Inputting audio at excessive
levels may distort audio or damage the
playback/recording device.
For details on the setting, see "System
Configuration Examples" (page 34).
g ATT (attenuator) switch
Set the attenuation level based on the
connected equipment.
Attenuation When to use
level (dB)
0 Standard switch position
10 Set to this position if the
AUDIO/MUTING
indicator on the receiver
occasionally lights red.
20 Set to this position if the
AUDIO/MUTING
indicator on the receiver
is always lit red.
h Battery compartment
Insert two LR6 (size AA) batteries here.
For details on how to insert batteries, see "Inserting
Batteries" (page 24).
i POWER/MUTING button
Turns the unit on or off. This button can
also be used to enable or disable the muting
function.
Function Button operation
Turn power on Press the button for
at least 1 second
Turn power off Press the button until
indicator turns off
Enable muting Press the button
function
Disable muting
function
j Channel display
Displays the transmission channel.
The display disappears after about 10
seconds. You can display it again by
pressing the channel selection button.
For details on the channel display, see "Channel
Display" (page 32).
k CHANNEL SELECT button
Allows you to select the RF mode and the
transmitting channel.
For details on selecting the RF mode and
transmitting channel, see "Configuring the
Transmitting Channel Settings" (page 32).
Compact receiver (receiver:
ZRX-C30)
Top/front
Left/rear
Parts Identification 21