To Disconnect The Bluetooth Device From The Hi-Fi Component; To Disconnect The Hi-Fi Component From The Bluetooth Device - Samsung MX-FS8000 User Manual

Basic Functions
• If the Bluetooth device has failed to pair with the
product, delete the previous "[Samsung] HI-FI XX)00(X"
found by the Bluetooth device and have it search for
the product again.
5. Play music on the connected device.
• You can listen to the music playing on the connected
Bluetooth device over the Hi-Fi Component system.
• In Bluetooth mode, some model's Play/Repeat/Stop/
Next/Back functions are not available.
The product only supports Middle Quality SBC data (up
to 237kbps@48kHz), and does not support High Quality
SBC data (328kbps@44.1kHz).
,, The AVRCP feature is not supported.
,, Connect only to a Bluetooth device that supports the
A2DP (AV)function.
,, You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
,, Only one Bluetooth device can be paired at a time.
,, Once you have turned off the Hi-FiComponent and
pairing is terminated, pairing will not be restored
automatically.To reconnect, you must pair the device
again.
,, The Hi-Fi Component system may not search or
connect properly in the following cases:
- If there is a strong electrical field around Hi-Fi
Component.
- If several Bluetooth devices are simultaneously paired
with Hi-Fi Component.
- If the Bluetooth device is turned off, not in place, or
malfunctions.
,, Note that such devices as microwave ovens, wireless
LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
which can cause electric interference.
To disconnect the Bluetooth device from
the Hi-Fi Component
You can disconnect the Bluetooth device from the
Hi-Fi Component. For instructions, see the
Bluetooth device's user manual.
• The Hi-Fi Component will be disconnected.
• When the Hi-Fi Component is disconnected from the
Bluetooth device, the Hi-Fi Component will display
DISCONNECTED --.* READY on the its display.
12 English
To disconnect the Hi-Fi Component
from the Bluetooth device
Press the CD/Bluetooth button on the front panel
of the Hi-Fi Component to switch from Bluetooth
mode to another mode or turn off the Hi-Fi Compo-
nent,
• The connected Bluetooth device will wait a certain amount
of time for a response from the Hi-Fi Component before
terminating the connection. (Disconnection time may differ,
depending on the Bluetooth device)
• The currently connected device will be disconnected.
In Bluetooth connection mode, the Bluetooth connection
will be lost if the distance between the Hi-Fi Component
and the Bluetooth device exceeds 16.25 feet (5 meters).
,, If the Bluetooth device comes back into the effective
range after disconnecting, you can restart the Hi-Fi
Component to restore the pairing with the Bluetooth
device.
,, The Hi-Fi Component automatically turns off after 25
minutes in the Ready mode.
You can use the MY Karaoke function to sing
along with your favorite CDs and USB tracks,
1. Connectthe microphoneto the MICjackon thefront
of the product.
,,_ If yourmicrophoneplug is largerthanthe 3.5 mm
MICjack,you needa Connector-Adaptor ( not
supplied)to completethe connection.
First,connect t heConnector-Adaptor to theMICjack
on thefrontofthe product,
Second, c onnectthemicrophone (withlarger j ack)to
theConnector-Adaptor.
2. Pressthe MIC VOL-, + button on the remote
control to adjust the volume of the microphone.
3. Pressthe MY KARAOKE buttonon the remote
control to suppressthe vocalifyou need.Eachtime
the buttonis pressed,the selectionis changedas
follows:
MY KARAOKEON-, MY KARAOKEOFF
,,_ If you hearstrangenoises(squealing or howling)
whileusingthe Kareekefeature,movethe
microphoneawayfrom the speakers. T urningdown
the microphone's volumeor the speakervolumeis
alsoeffective.Do not aim the MICROPHONE
towardstheSPEAKERS.
,,_ The microphone does not operateinthe AUXand
TUNERmode.
,,_ If you connecta microphone,GIGASOUND
automatically turnsoff.To turn GigaSound backon,
you must removethe microphone, a nd thenpress
the GigaSound button.