Mmc: 212 Alarm Ringing Station - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 212
3 3
DCS
Used to determine which devices will be alerted when an alarm sensor is activated.
Device
Station
Station group
The above devices will ring like a doorphone and follow the door ring time-out. When ringing,
display keysets show the display assigned in MMC 213, Alarm Message. The bottom line of the
keyset display gives an option to clear the alarm. Ringing initiated by an alarm sensor is an-
swered by going off-hook and on-hook again at a ringing keyset. If a device such as Ring Over
Page or a common bell is the only device assigned to ring, it may be answered by assigning a
direct pickup key with this device as the extender. If the alarm is unanswered by the door ring
time-out, ringing will cease but the display will remain until cleared by dialling the alarm clear fea-
ture code (57) and passcode (default 8765).
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 212
Display shows first sensor (3501 on DCS system or
351 on Compact II system)
2. Dial sensor number (e.g., 3502 or 352)
OR
Use UP or DOWN to scroll through sensor numbers
and press RIGHT soft key to advance cursor
3. Enter valid ring destination for day (e.g., 205)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor
Select night destination in the same way
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ALARM RINGING STATION
7 7
CI CII
DCS
201–349
500–529
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
All sensors ring 500 day/night
MMC 213 Alarm Message
MMC 212 [DCS / Compact II] (Page 1 of 1)
3 3 7 7
816 408i
Compact II
201 - 308
500 - 519
DISPLAY
[3501]ALARM RING
D:500
[3502]ALARM RING
D:500
[3502]ALARM RING
D:205
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408
N:500
N:500
N:500