Sony BVMF170A Operation Manual page 52

Menu
Color Temp Adj
Manual
Manual Adjust
Original Value
52
Adjustment Menu
Function and operation ([
Adjusts the color temperature.
When the item is selected, the color temperature data to be adjusted is displayed.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
To change the color temperature data to be adjusted, select D93, D65, User1, User2, User3,
User4 or User5 in the Color Temp menu of the Channel Configuration menu.
Note
If you measure the color temperatures of different display types, such as CRT, LCD, or OLED,
by using a common (or general) color analyzer that is based on CIE 1931, and adjust the xy
chromaticity to the same value, the appearance may be different because of optical spectrum
differences.
To compensate for this difference, the D93, D65 and User1 to User5 settings of the monitor
are adjusted by an offset*.
* The offset value applied (x-0.006, y-0.011) is based on the Judd's function to the CIE 1931 (x, y) value.
Adjusts the color temperature manually.
When the item is selected, the color temperature data to be set is displayed.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
When Contrast/Bright Hold is set to Off, the color temperature data are displayed. The
contrast data is displayed as the picture preset data Preset1 to Preset5 set in the Picture
Preset menu of the Channel Configuration menu. To change the type of the picture preset
data, select from Preset1 to Preset5 in the Picture Preset menu (page 58) of the Channel
Configuration menu.
Adjusts the color temperature using the BRIGHT, CHROMA, PHASE and/or CONTRAST
knobs.
When the item is selected, the color temperature adjustment display appears, and the Red,
Green and/or Blue color temperature data to be adjusted are displayed to allow gain or bias
adjustment. Select gain or bias adjustment, using the UP/DOWN buttons.
The adjustable items and relevant knobs are as follows:
To adjust Red (red): BRIGHT knob
To adjust Green (green): CHROMA knob
To adjust Blue (blue): PHASE knob
To adjust brightness (Red, Green and Blue together): CONTRAST knob
To hide the characters on the monitor during manual adjustment
Set the CHAR OFF button of the controller to on. As the characters on the display are
hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF
button to off.
To reset Red, Green and Blue to the value before adjustment
During Red, Green and Blue adjustment, you can press the corresponding MANUAL button
to reset to the value before adjustment.
Pressing the MANUAL button of CONTRAST resets all Red, Green and Blue to the values
before adjustment.
Note
You cannot reset the setting after you press the ENTER (Ent) button, even if you press the
MANUAL button.
To cancel adjustment
Press the MENU button. The adjustment data is cleared and the setting returns to the
previous value.
To confirm adjustment
Press the ENTER (Ent) button.
Note
During adjustment, the screen saver is activated automatically if the operating conditions are
met, regardless of the setting of the screen saver function.
Sets the initial value.
You can select from D93, D65, User1, User2, User3, User4 or User5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
]: factory setting)