Installation Instructions - GE PKD915 Owner's Manual

Installation of the warming drawer.
Read these instructions completely and carefully.
Before You Begin
IMPORTANT:Save these instructions for the local electrical NOTE TO CONSUMER: Keep this Owner's Manual and
inspector's use. Installation Instructions for future use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND
ORDINANCES.
NOTE TO INSTALLER: Leave these instructions with the
appliance after installation is completed.
NOTE: This appliance must be properlg grounded.
NOTE: Insure that the power cord does not contact the hot
surfaces on the bottom of ovens, cooktops, or ang other
appliance.
Product
Dimensions
!4 27': + 23¼" --_.
iI
iJ
ii
iI
II
LI- ..........
26¼"
Including
handle
9" 10½"
Dimension A
27" Drawer 30" Drawer
26 Y_" | 29 _4"
/
Custom Panel Kits
ZXD27B--This kit provides for the installation of a custom front
panel on 27" wide models.
ZXD3OB--Thiskit provides for the installation of a custom front
panel on 30" wide models.
Tools Needed
2 ×4 or 2 x 2 lumber for runners and brace Saw
Wood screws and adhesive or other hardware for installing
runners or shelf to support warmer drawer.
Runners must be level, rigidlg mounted and capable of
supporting 150 pounds.
Level
Drill and 1/16" bit
Phillipsscrewdriver
10