Table of Contents
Advertisement
The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU.
The SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five
user files (USER1 to USER5) can be saved. These settings (up to 4 files) can be written to and loaded from SD memory cards.
System
SHIFT+FF (a)
System
file
SHIFT+REW (b)
This unit can possess up to five user files, each of which can
be selected from a menu setting.
Setting values can be changed as necessary.
➝For details on change operations, refer to "Changing
Settings" (page 156).
After a change, the content of USER1 can be saved (copied)
to USER2 to USER5.
➝For details, refer to "Setup menu No. A01 (SAVE)" (page
181).
SETUP menu settings can be saved to and loaded from an SD
memory card.
➝For details, refer to "Setup menu No. A10 (CARD READ)
(page 182), A11 (CARD WRITE) (page 182)".
Setup
Unit Setup
Basic
Operation
Interface
SHIFT+FF (a)
USER1
SHIFT+REW (b)
A10 CARD READ
TimeCode
Video
User settings file
SHIFT+FF (a)
SHIFT+FF (a)
USER2
USER3
SHIFT+REW (b)
SHIFT+REW (b)
SHIFT+REW (b)
SHIFT+FF (a)
A11 CARD WRITE
SD
memory
card
Automatic Loading of User Setting File at
Power up
You can specify the user setting files that will be loaded in
USER1 at power up. You can also decide to use the same
settings as last time.
➝For details, refer to "Setup menu No. A02 (P.ON LOAD)"
(page 181).
Audio
DIF
Menu
SHIFT+FF (a)
USER4
USER5
SHIFT+REW (b)
Setup: Unit Setup
155
Advertisement
Table of Contents
