Fujitsu Solaris PCI GigabitEthernet 3.0 User Manual page 41

Chapter 3 Setting Configuration Information
flow_control
adv_10fdx_cap
adv_10hdx_cap
adv_100fdx_cap
adv_100hdx_cap
adv_1000fdx_cap
adv_1000hdx_cap
adv_autoneg_cap
adv_role_cap
34
parameter status
link_status Read only
link_speed Read only
link_mode Read only
autonego Read only
Read only
cardtype Read only
instance Read and write
Read and write
Read and write
Read and write
Read and write
Read and write
Read and write
adv_pauseTX Read and write
adv_pauseRX Read and write
Read and write
Read and write
meaning
0 : Link down
1 : Link up
1000 : 1000Mbps
100 : 100Mbps
10 : 10Mbps
0 : Half Duplex communication
1 : Full Duplex communication
0 : Auto-Negotiation is Off.
1 : Auto-Negotiation is On.
0 : None (flow_control disabled)
1 : LocSend (Can transmit pause frame only)
2 : Rem (Can receive pause frame only)
3 : Sym (Can receive and transmit pause frame)
0 : SX (PW008GE4/PW0G8GE1/SE0X7GD2X)
1 : T (PW008GE5/PW0G8GE2/SE0X7GD1X/
PW008QG1/SE0X7GQ1X,
PRIMEPOWER250/450 secondary LAN port)
Instance Number
10Mbps/FullDuplex Setting
0 : Invalid
1 : Valid (Default)
10Mbps/HalfDuplex Setting
0 : Invalid
1 : Valid (Default)
100Mbps/FullDuplex Setting
0 : Invalid
1 : Valid (Default)
100Mbps/HalfDuplex Setting
0 : Invalid
1 : Valid (Default)
1000Mbps/FullDuplex Setting
0 : Invalid
1 : Valid (Default)
1000Mbps/HalfDuplex Setting
0 : Invalid
1 : Valid (Default)
Transmit Pause Frame Setting
0 : Invalid
1 : Valid (Default)
Receive Pause Frame Setting
0 : Invalid
1 : Valid (Default)
Auto-Negotiation Setting
0 : Auto-Negotiation Off (Fixed mode)
1 : Auto-Negotiation On (Default)
Role Setting (Not
PW008GE4/PW0G8GE1/SE0X7GD2X)
0 : Slave
1 : Master
2 : Auto (Default)
valid for