Section 3 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local Hard
Click the Save Configuration button to save the current camera
Drive:
configuration to your local PC.
Load From Local
To load a previously saved configuration, click the Browse... button, select
Hard Drive:
your saved configuration file, then click the Restore Configuration From
File button.
Click the Restore Factory Defaults button to reset all settings back to
Restore To Factory
Default:
the factory defaults. Please note that this will erase any changes you have
made to the settings of the camera.
Click the Reboot the Device button to reboot the camera.
Reboot The Device:
D-Link DCS-5020L User Manual
System
41
41