Zero Configuration Setup - D-Link DCS-5020L User Manual

Section 2 - Installation

Zero Configuration Setup

If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration Setup. Zero Configuration
automatically configures your camera's settings for you and adds the camera to your mydlink account automatically.
Step 1 - Connect the Ethernet Cable and Power Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available (LAN) port on your D-Link Cloud Router. Connect the
power adapter into the power port on the back of the camera.
Note: If you wish to use your camera wirelessly, you will be able to remove the
cable after the Zero Configuration Setup is complete.
Step 2 - Attach the External Power Adapter
Plug the power adapter into a wall outlet or surge protector.
D-Link DCS-5020L User Manual 11