Fujitsu SOFTUNE F2 MC-16 User Manual page 304

CHAPTER 2 DEPENDENCE FUNCTIONS
- View the following dialogs.
Line Assembly dialog (Disassembly window)
Break setting dialog [Software]
● Flash memory synchronization [Debbuger -> Flash]
• Manual flash memory synchronization
Select the [Environment] - [Flash area control] menu. For details, refer to "4.7.4 Flash area control" in
"SOFTUNE Workbench Operation Manual".
• Automatic flash memory synchronization
- When a user program has been executed
- When a reset has been issued
- When debugging has been ended
- When the use of software break is set to prohibition
- When the target file is automatically loaded at start of debugging
Note:
To shorten flash memory synchronization processing, set the communication speed of the debugger to
the high-speed mode. For details, refer to "2.6.3.1
Debugging".
290
Increasing Communication Speed during