Event-Related Commands In Normal Mode - Fujitsu SOFTUNE F2 MC-16 User Manual

■ Event-related Commands in Normal Mode

Since the real-time trace function in the normal mode is actually the single trace function, the commands can
be used to control.
Table 2.2-6 shows the event-related commands that can be used in the normal mode.
Table 2.2-6 Event-related Commands in Normal Mode
Mode
Normal Mode
Usable Command
SET EVENT
SHOW EVENT
CANCEL EVENT
ENABLE EVENT
DISABLE EVENT
SET SEQUENCE
SHOW SEQUENCE
CANCEL SEQUENCE
ENABLE SEQUENCE
DISABLE SEQUENCE
SET DELAY
SHOW DELAY
SET TRACE
SHOW TRACE
SEARCH TRACE
ENABLE TRACE
DISABLE TRACE
CLEAR TRACE
CHAPTER 2 DEPENDENCE FUNCTIONS
Function
Set event
Displays event setup status
Delete event
Enables event
Disables event
Sets sequencer
Displays sequencer setup status
Cancels sequencer
Enables sequencer
Disables sequencer
Sets delay count
Displays delay count setup status
Sets trace buffer-full break
Displays trace data
Searches trace data
Enables trace function
Disables trace function
Clears trace data
91