Silvercrest CDV-710 User Manual page 78

Problem Cause
The radio hasn't been
connected correctly.
The device temperature is too
The device doesn't
high.
retain the stored
Contacts 4 and 7 haven't been
stations
connected properly or the
vehicle manufacturer has
assigned these in reverse.
Data carrier isn't
Data carrier wasn't recognized
being drawn in
by the insertion technology.
completely.
The CD/DVD was inserted with
the printed side to the bottom.
The CD/DVD has too many
scratches.
The CD/DVD is dirty.
The inserted
The device temperature is too
CD/DVD can't be
high.
played.
The coating on the data carrier
is faulty (very rare)
The CD/DVD contains incorrect
or faulty data.
78
Solution
Please check if all cables have been attached
correctly.
Reduce the volume of the device.
Contact your vehicle manufacturer or a
specialised workshop and purchase a fitting
adapter set there.
Remove the data carrier and insert it again.
Flip the CD/DVD over and try again.
Create another CD/DVD from the original or
have the CD/DVD repaired.
Clean the CD/DVD (without cleaning materials,
just a lint-free cloth).
Reduce the volume of the device.
Purchase another type of data carrier and
create the data carrier again.
The CD/DVD can't be used with this device.
Please burn your audio data onto a separate
data carrier and try again.