Toshiba GA-1170 Service Manual page 9

Item
Setting
e-STUDIO162/162D,
e-STUDIO151/151D
Light Red/ White/
source Green/ Red/
Blue Green/
Blue
Void On/Off
(3) Send file (message and filename)
• Information contained in filename
Sender name : Use MFP product name.
Date & Time : Date and time at which file is sent
Session page : Image send counter
counter
Unique identifier : Automatically created based on the information
of the date and time and image send counter.
Example:
e-STUDIO162D_20000620_155114_0057_06a3f3393948.pdf
• Mail subject
Can be freely set.
Default: Scanned image. device name: e-STUDIOXXX (MFP product
name)
Example: Scanned image. device name: e-STUDIO162D
• Mail message
The following messages are added to the image send mail.
Device name: Freely set
Model: MFP product name
Location: Freely set
File type: File type of send image
Resolution: Resolution of send image
Example;
Device name :e-STUDIO162D
Model name :e-STUDIO162D
Location :D2) Planning dept.
File type :PDF MMR (G4)
Resolution :200 dpi x 200 dpi
Default
Remarks
e-STUDIO162/162D,
e-STUDIO151/151D
Green White Light source can
be selected only
when the color
mode is in
"Monochrome".
On When On is
selected, the
edges of images
are cut.
GA-1170 SPECIFICATIONS
(4) Recipient registration
[e-STUDIO162/162D, e-STUDIO151/151D]
• Up to 200 destinations can be registered on the network expansion
kit to which the scan can be sent from the network scanner.
• The mail address registered for each destination can be selected
from the mail address which is searched using LDAP.
• The information for each recipient includes the recipient name, IP
address or mail address, scanning size, format type, and scan
parameter.
• Either of LDAP-selected or directly-entered mail address scan setting
is available. If the destination is a mail address entered through the
main system or selected by LDAP, this scan setting is used.
• The destination name is displayed on the LCD.
(5) Scanning size
[e-STUDIO162/162D, e-STUDIO151/151D]
• Scanning size is the size set up in main unit(Copier).
(Apply to the main scan, a subscan, ADF, and OC)
(6) Scanner limitations
[e-STUDIO162/162D, e-STUDIO151/151D]
• The scanning function is allocated to the network expansion kit. The b
Button Manager settings are disabled.
• When the network expansion kit is connected, the scanner function
through TWAIN (pull scan) and push scan which used button man-
ager on pc are not available.
1 – 5