Toshiba GA-1170 Service Manual page 16

4. Updating the firmware
After you select the file, click the Submit button. The firmware is
transmitted to Network Box, and it is updated. The message indi-
cated in Fig.5 blinks repeatedly until the updating process is com-
pleted. Do not turn off the power supply.
[Fig.5: Updating in progress]
5. Restarting your MFP
When updating is completed, the message shown in Fig.6 appears
on screen. Turn off the power and then turn it on again to restart
Network Box.
[Fig.6: Updating completed]
Caution: If a DHCP is used, the browser may not be able to reload auto-
matically in some cases when transferring to the upload mode
because different IP addresses are read. Therefore, we rec-
ommend that you use a fixed IP address when updating firm-
ware.
If the upload mode is operating with different IP addresses,
check the IP address obtained by the Ethernet address of Net-
work Box from the DHCP server and display the updating
mode URL again using the browser.
When a proxy server is used, the screen may not be updated
by reloading. In that case, you need to update manually.
GA-1170 Updating Network Box Firmware
5 – 2