File Management - Panasonic AG-RCP30P Operating Instructions Manual

P2 remote control panel, car use only
Hide thumbs Also See for AG-RCP30P:
Table of Contents

Advertisement

Administrator Setup
Rec Start Information
Own Speed
Use this function to set the speed
of your own vehicle at the start of
recording according to set speed
unit.
Setting : 1 - 500
Target Speed
Use this function to set the speed
of the target vehicle at the start of
recording according to set speed
unit.
Setting : 1 - 500
Speed Unit
Setting : MPH/KPH
Notes:
• When both own vehicle speed
and target vehicle speed are set,
recording starts as soon as one
criteria is met.
• Own vehicle speed priority order:
Vehicle speed pulse, radar gun and
GPS. The priority order is vehicle
speed pulse followed by GPS
for a radar gun without a vehicle
speed measurement function.
This priority order is the same also
with a vehicle recording trigger
and in an On-Screen display.

File Management

Export
Use this function to copy video and
audio data files recorded on the Memory
Card Video Recorder to a USB memory
device. The video and audio data files
on the Memory Card Video Recorder
are automatically deleted after copying.
Note:
When a version upgrade file is saved
on the USB memory device, the error
message "E28406" appears, and
exporting is not performed (see page 57).
40
(continued)
Delete All Files
Use this function to delete all video
and audio data files on the Memory
Card Video Recorder. Select
"Delete" in the confirmation dialog
box that appears to delete the files
or select "Cancel" to keep the files.
Notes:
• Do not make button operations or
turn the power off during a delete
all files operation.
• The following error messages
indicate that P2 card files cannot
be deleted.
CARD PROTECT
VUP CARD
UNFORMATTED
ILLEGAL CARD
NO CARD
Format
Use this function to format all P2
cards in the Memory Card Video
Recorder.
Select "Format" in the confirmation
dialog that appears to format the
cards. Select "Cancel" to cancel
formatting.
Notes:
• Do not make button operations or
turn the power off during a format
operation.
• The following error messages
indicate that P2 card files cannot
be formatted.
CARD PROTECT
VUP CARD
ILLEGAL CARD
NO CARD

Advertisement

Table of Contents
loading

Table of Contents