Call Forwarding To Outside Line - Panasonic KX-TD308 Installation Manual

Call Forwarding to Outside Line

Description
Selection
Default
Programming
Conditions
Feature References
4-l 14 System Programming
4 7 a
This program determines which Classes of Services (COS) are
allowed to perform the Call Forwarding to Outside Line function,
COS number: 1 through 8, * (* =all COS)
l
Disable / Enable
l
All COS - Disable
1.
Enter 504.
Display: 504 CALL F'WD CO
2. Press NEXT.
Display: COS NO?-+
Enter a COS number.
3.
To enter COS number 1, you can also press
Display example: COS1:Disable
Keep pressing SELECT until the desired selection is
4.
displayed. .
Press STORE.
5.
To program another COS, press NEXT or PREV, or
6.
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
Press END.
8.
To assign all COS to one selection, press the * key in step 3. In this
l
case, the display shows the contents programmed for COS 1.
Program [601] "Class of Service" is used to assign a Class of Service to
l
each extension.
Section 3, Features
Call Forwarding - to Outside Line
COS Programming
NEXT.