2 0 8
Description
Selection
Default
Programming
Conditions
Feature References
4-68
System Programming
4 4 a
Timer Programming
Inter Digit Time
Assigns the maximum time allowed between digits on an outgoing
toll call. If an extension user fails to dial any digits during this
time, the DTMF receiver is released. This timer applies until the
Toll Restriction check is completed.
Time (seconds): 5 through 30
10 s
1.
Enter 208.
Display: 208 INTER DIGIT
2.
Press NEXT.
Display example: Time:10 set
the time.
Enter
3.
To
change the current entry, press
4.
Press STORE.
Press END.
5.
timer
This
is used for toll
l
You cannot leave the entry empty.
l
Section 3, Features
Toll Restriction
CLEAR
and enter the new time.
restriction checking.